Insert Bearings Spherical OD
Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.
- TIMKEN GY1108KRRB TDCF SGT Insert Bearings Spherical OD
- 3.4375 in
- 3.4100 in
- TIMKEN GY1106KRRB TDCF SGT Insert Bearings Spherical OD
- Oil-Impregnated Expanded Cast Iron
- Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil lubrication -40 to +302 °F
- TIMKEN GYE25KRRB TDCF SGT Insert Bearings Spherical OD
- 2.4375 in
- Double V-Lock
- TIMKEN GYE35KRRB TDCF SGT Insert Bearings Spherical OD
- 3.0000 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- TIMKEN GYE40KRRB TDCF SGT Insert Bearings Spherical OD
- 1-3/8 in
- No Cage
- TIMKEN GYE30KRRB TDCF SGT Insert Bearings Spherical OD
- 0.6250 in
- 2150 lbf
- TIMKEN GY1115KRRB TDCF SGT Insert Bearings Spherical OD
- 2.1875 in
- Non-Expansion Bearing (Fixed)
- TIMKEN GY1112KRRB TDCF SGT Insert Bearings Spherical OD
- 1.4375 in
- 7980 lbf
- TIMKEN GY1111KRRB TDCF SGT Insert Bearings Spherical OD
- 2.0000 in
- 5220 lbf
- DODGE INS-IP-607R Insert Bearings Spherical OD
- 0.6250 in
- 1000 lb
- DODGE INS-IP-600R Insert Bearings Spherical OD
- 120 mm
- Galvanized Steel