Cam Follower and Track Roller - Stud Type
Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole.
Cam followers and track rollers from Grainger can withstand a variety of mechanical applications. Choose from assorted cam follower types, including full complement needle rollers, stud, heavy stud, crowned and yoke. Track rollers can handle applications with a combination of both radial and axial loads. Choose from cam followers and track rollers in a wide range of types, sizes and other specifications at Grainger.Cam Followers & Track Rollers provide antifriction solutions for translating rotation to linear motion or supporting either pure radial or combination thrust loads depending on the rolling elements types.
- MCGILL MCF 35 Cam Follower and Track Roller - Stud Type
- 1.4375 in
- 2-1/4 in
- MCGILL MCF 35 B Cam Follower and Track Roller - Stud Type
- 140 mm
- Without Snap Ring
- MCGILL MCF 35 S Cam Follower and Track Roller - Stud Type
- 50 mm
- 144.5 mm
- MCGILL MCF 32 X Cam Follower and Track Roller - Stud Type
- 70 mm
- 2.9900 in
- MCGILL SK 1104 Cam Follower and Track Roller - Stud Type
- 23-1/2 in
- 5700 lb
- MCGILL VCF 5 1/2 Cam Follower and Track Roller - Stud Type
- 2.9375 in
- 3.0000 in
- MCGILL VCF 2 1/2 Cam Follower and Track Roller - Stud Type
- 0.7500 in
- Steel
- MCGILL VCF 4 1/2 Cam Follower and Track Roller - Stud Type
- 1.1250 in
- 2150 lbf
- MCGILL PCF 5 Cam Follower and Track Roller - Stud Type
- 3.1875 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- MCGILL PCF 3 1/4 Cam Follower and Track Roller - Stud Type
- 2.4375 in
- 2.7000 in
- MCGILL PCF 4 Cam Follower and Track Roller - Stud Type
- 1.9375 in
- Cast Iron