Insert Bearings Spherical OD
Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.
- 15,875 mm x 40 mm x 27,38 mm TIMKEN GY1010KRRB Insert Bearings Spherical OD
- 3.1875 in
- 3.7500 in
- 12,7 mm x 40 mm x 27,38 mm TIMKEN GY1008KRRB Insert Bearings Spherical OD
- 2.4375 in
- 2.7000 in
- 34,925 mm x 72 mm x 42,87 mm TIMKEN GY1106KRRB SGT Insert Bearings Spherical OD
- 4.9375 in
- Cast Steel
- 76,2 mm x 140 mm x 77,80 mm TIMKEN GYM1300KRRB Insert Bearings Spherical OD
- 2.5000 in
- 2.9000 in
- 60 mm x 110 mm x 65,07 mm TIMKEN GYE60KRRB Insert Bearings Spherical OD
- 2.0000 in
- 5220 lbf
- 25 mm x 52 mm x 34,11 mm TIMKEN GYE25KRRB SGT Insert Bearings Spherical OD
- 0.9375 in
- 3150 lbf
- 61,9125 mm x 110 mm x 65,07 mm TIMKEN GY1207KRRB Insert Bearings Spherical OD
- Plain Sleeve
- Duralon Filament