Insert Bearings Spherical OD
Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.
The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.
- DODGE INS-GT-100-CR Insert Bearings Spherical OD
- 90 mm
- Non-Expansion Bearing (Fixed)
- DODGE INS-GT-20M-CR Insert Bearings Spherical OD
- 0.7500 in
- 52100 Steel/High Phosphorus Nickel Coated
- DODGE INS-GT-012-CR Insert Bearings Spherical OD
- 1.4375 in
- 4950 lbf
- DODGE INS-SXV-203 Insert Bearings Spherical OD
- 0.7500 in
- 2150 lbf
- DODGE INS-SXV-200 Insert Bearings Spherical OD
- DODGE
- INS-SXV-200
- DODGE INS-SXV-115 Insert Bearings Spherical OD
- 1.3750 in
- 2150 lbf
- DODGE INS-SXV-200L Insert Bearings Spherical OD
- 2.7500 in
- Powder Coat
- DODGE INS-SXV-112 Insert Bearings Spherical OD
- 70 mm
- 2.9900 in
- DODGE INS-SXV-111 Insert Bearings Spherical OD
- 1.5000 in
- Contact with Slinger
- DODGE INS-SXV-008 Insert Bearings Spherical OD
- Open
- Uncoated
- DODGE INS-SXV-010 Insert Bearings Spherical OD
- 5/8 in
- 50000
- LINK BELT YG235NL Insert Bearings Spherical OD
- 1.0000 in
- Steel